How To Install A Whirlpool Refrigerator Ice And Water Filter

Your model number may be located in a variety of locations:

Places to look:

• Ceiling of refrigerator interior
• Inside walls of fridge or freezer (perhaps behind drawers)
• Frame backside the door when the door is opened
• Behind the kickplate
• On the back of the fridge

A sample model number label looks similar this:

How to replace your refrigerator water filter

Your refrigerator water filter works hard to continue your drinking water clean and tasting fresh. In social club to proceed it that style, it needs to be routinely inverse—nosotros recommend once about every six months. It'south easy to locate your filter and replace it with a fresh i. Go along reading to learn how to hands find and supplant your Whirlpool^® refrigerator water filter.

Finding and replacing your refrigerator filter

Before you tin supersede your fridge h2o filter, you need to know what you have. Await for the number printed on it or notice the approved water filter for your Whirlpool^® refrigerator.

Care tip: Once yous know your filter type, consider purchasing a subscription to automatically ship a replacement filter every three or vi months.

Select your water filter

Choose your filter from the products listed beneath to follow simple replacement steps or watch a video on how to change your Whirlpool^® refrigerator water filter.

Filter one: Pace-by-step instructions

1. Locate your water filter comprehend in the upper right-hand corner inside your refrigerator or in the base grille.
2. Elevator the filter door up.
3. Pull the filter out and discard it.
4. Open your new filter and remove the protective coverings from the O-rings. Make sure the O-rings are still in place after the encompass has been removed.
5. When inserting the new filter into the slot, make sure the arrow is pointing upwards. Do not force the water filter. If information technology does not slide in easily, rotate it until the notches are properly aligned with the grooves.
6. Push the filter door closed and so it snaps into identify.
7. One time your filter is replaced, run four gallons of water through the line to properly affluent the new filter.

Filter ii: Pace-by-step instructions

1. Locate your water filter embrace in the upper right-hand corner inside the refrigerator.
2. Pull open the filter door.
3. Pull the filter then it's angled down, turn it to the left and pull. Discard the old filter.
4. Open your new filter and remove the protective coverings from the O-rings. Make sure the O-rings are however in place after the encompass has been removed.
5. When inserting the new filter into the filter slot, make certain the arrow is pointing up. Equally you push in, the filter will begin to rotate.
6. Turn the filter clockwise until it locks.
7. Push the filter door closed then it snaps into identify.
8. Once your filter is replaced, run four gallons of water through the line to properly flush the new filter.

Filter iii: Step-by-step instructions

1. Locate your h2o filter encompass on the left side of the fridge'southward base grille.
2. Push button the eject push to release the filter.
3. Pull the filter out and discard it.
4. Open your new filter and remove the protective coverings from the O-rings. Exist sure the O-rings are still in identify after the comprehend has been removed.
5. Place the filter cap on the new cartridge and then the ridges align. Turn the cap clockwise to lock into identify.
6. When inserting the new filter into the slot, make sure the arrow is pointing to the left.
7. Push the filter in until the eject button pops back out.
8. Once your filter is replaced, run four gallons of water through the line to properly flush the new filter.

Filter 4: Step-by-step instructions

1. Locate your h2o filter cover in the upper right-hand corner of your refrigerator interior.
2. If the filter tab in your refrigerator is facing outward, push on it and pull the cover down. If the tab is on the bottom of the cover, pull forward and downward on the small lever to open up the cover.
3. Turn the filter to the left and pull. Discard the old filter.
4. If this is a beginning-time installation, you'll find a cap within the filter slot. Turn information technology counterclockwise and pull it out.
5. To insert the new filter in the slot, line it up with the grooves, push in and turn information technology to the correct.
6. Button up on the filter to lock in place.
7. Push the filter door upwardly so that it snaps closed.
8. One time your filter is replaced, run four gallons of water through the line to properly flush the new filter.

Need your model number?

Whirlpool® refrigerators display their model number information in different locations. Consult our guide to notice yours.

More cleaning tips and tricks

• 

  How to Clean a Dishwasher Filter Cleaning your dishwasher filter is easier than you might think. We'll show you how to remove, clean and replace your dishwasher filter in only minutes.

• 

  How to Clean a Microwave Inside and Out Do you have microwave cleaning questions? Read our guide to learn how to clean your microwave speedily and simply, from the interior to the turntable.

• 

  How to Clean a Refrigerator Cleaning the inside of your refrigerator is an important household task. Learn how to make clean a refrigerator quickly, hands and finer with our guide.

home heartbeat

Set for more tips, abode hacks and apparatus guides?

Was this article helpful? Pass information technology on

Item added to the compare list, yous can find it at the end of this folio

Source: https://www.whirlpool.com/blog/kitchen/how-to-replace-refrigerator-water-filters.html

Posted by: hopkinscooncers.blogspot.com

Share this post